AXIAL FLUX GENERATOR COIL DESIGN - BLANK RFQ CHECKLIST
CustomAxialFlux · Model revision 2026-11-03
Source: /resources/axial-flux-generator-coil-design
Planning checklist only. No tested hardware or thermal rating.
For current inputs and calculated estimates use the live tool's RFQ export.

[ ] Drawing revision / NDA status / prototype quantity / target schedule:
[ ] OD / ID / axial thickness / limb width / rotor clearances:
[ ] Pole and coil counts / phase polarity map / parallel grouping:
[ ] Effective field / pole coverage / turns / actual mean turn length:
[ ] Conductor type / copper area / strand count and diameter / insulation:
[ ] Speed range / load current convention / output mode / diode drop:
[ ] Ambient / duty / cooling path / allowed hotspot temperature:
[ ] Measured cold-hot resistance / inductance / speed-EMF / loaded voltage:
[ ] Dry-wound packing check / resin compatibility / insulation test plan:
[ ] Attach current live-tool export and 2D PDF / STEP files for drawing review.

Tool limits: copper-only coreless 4:3 winding; AC balanced unity PF;
DC star six-pulse continuous current, not capacitor-input or battery clamping.
AC multipliers and inductance are uncalibrated assumptions.
Contact: inquiry@customaxialflux.com